Excalibur AL-1950-EDPB Installation Manual download pdf (Page 18)

Programming Controllers/Transmitters (cont’d)

If the Unauthorized T

ransmitter Alert feature is on, programming a transmitter to the

system will activate the “UTA” warning and the extended Status Light indication

. For

the next 48 hours, the siren/horn will sound a brief series of chirps every time the

vehicle’s ignition key is turned on.

Step 3 Press the “lock” button on each transmitter one at a time. The system will

chirp the siren/horn once to conrm that each was learned. When programming the

2-way controller

, the system’s ID is sent to the controller

. Wait for the controller to

beep twice, indicating it has learned the system’

s ID*

. If a code is not received within

10 seconds of Step 2, the learning process will automatically exit.

* If you are changing which vehicle prole is programmed to your system (ie. it was

originally programmed for car1 and you want it to be car2), you will need to erase the

system ID from the controller before programming controllers/transmitters. T

o do so:

Step 1 Press LOCK, UNLOCK, TRUNK, & START simultaneously for 1 second (if

done correctly, the controller’s buttons will not illuminate)

. The controller will give a

short beep/vibration. Release the buttons.

Step 2 Press LOCK, UNLOCK, TRUNK, & ST

ART simultaneously for 1 second again

The controller will give a long beep/vibration. Release the buttons, the system ID is

now erased.

Special Programming procedure to turn on the UTA

feature: Using this method

to program transmitters or optional controllers, and to turn on the Unauthorized Trans-

mitter Alert feature

Follow the same steps as the Standard Programming, but on any transmitter/con-

troller being programmed instead of pressing the “lock” button, press the “lock” and

the “unlock” buttons together. This action turns

on the Unauthorized Transmitter

Alert feature and at the same time programs the transmitter or controller to operate

the system

Once the Unauthorized T

ransmitter Alert feature is turned on, the warning will

sound for 48 hours after any transmitter programming, including the programming

session which was used to turn it on

. This feature can only be turned of

f again by

sending the system back to Omega for a reset

Step 1 T

urn the ignition key “ON”, then “OFF”

Step 2 Within 5 seconds of step 1, press the valet switch 5 times to access user

features (10 times to access installer features)

~ The siren/horn will sound and the status light will turn on.

Step 3 Within 10 seconds of step 2, press the valet switch the number of times cor-

responding with the desired feature’s number.

~ The siren/horn will chirp, the status lights, and the parking lights will ash equal

to the selected feature.

Step 4 Change the feature by pressing the transmitter button that corresponds with

the desired setting. The siren/horn will chirp to correspond with the chosen setting.

Programming Features

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Comments to this Manuals

No comments

Excalibur AL-1950-EDPB Installation Manual Page 18

Comments to this Manuals

Related products and manuals for Remote starters Excalibur AL-1950-EDPB